The applicable standard for getting CE Certificate for Hot Air Oven is BS EN 61010-1:2010. 

For getting CE Certification for Hot Air Oven, certain requirements need to be fulfilled as mentioned in the standard. These are:

• Protection against hazards from fluids
• Protection against spread of fire
• Protection against electric shock
• A.C voltage test

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Hot Air Oven is issued.

The applicable standard for getting CE Certificate for Control Panel for Airjet Cleaning Machine is BS EN 60204-1:2006+A1:2009. 

For getting CE Certification for Control Panel for Airjet Cleaning Machine, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Protection Against Electric Shock
• Protection of Equipment
• High Voltage Test
• Earth Contact Resistance Test

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Airjet Cleaning Machine is issued.

The applicable standard for getting CE Certificate for Mini Roll Compactor is BS EN 60204-1:2006+A1:2009. 

For getting CE Certification for Control Panel for Mini Roll Compactor, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Protection against electric shock
• Earth Resistance Test
• High Voltage Test
• Insulation Resistance Test
• Accessories and Lighting

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Mini Roll Compactor is issued.

The applicable standard for getting CE Certificate for Mini Roll Compactor is BS EN 60204-1:2006+A1:2009. 

BS EN 60204-1:2006+A1:2009 specifies recommendations and requirements relating to electrical equipment of machines in order to promote:

• Safety of persons and property
• Consistency in control response
• Ease of maintenance

For getting CE Certification for Powder Filling Machine, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Protection by enclosures
• Protection against indirect contact
• Insulation Resistance Test
• Voltage Test
• Conductors and Cables

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Powder Filling Machine is issued.

The applicable standard for getting CE Certificate for Control Panel for Tablet Press is BS EN 60204-1:2006+A1:2009. 

For getting CE Certification for Control Panel for Control Panel for Tablet Press, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Insulation Resistance Test
• Technical Documentation
• Marking, warning, signs and reference designations
• High Voltage Test

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Tablet Press is issued.

The applicable standard for getting CE Certificate for Control Panel for Labeling Machine is BS EN 60204-1:2006+A1:2009. 

BS EN 60204-1:2006+A1:2009 is an application standard but does not intend to limit or inhibit technological advancement. BS EN 60204-1:2006+A1:2009 does not cover all the requirements which are needed/required by the other standards or regulations in order to protect people from hazards excluding electrical hazards. 

Different types of machines have different requirements to be accommodated for providing adequate safety. The requirements to be fulfilled for getting CE Certificate for Control Panel for Labeling Machine are: 

• Insulation Resistance Test
• High Voltage Test
• Control Circuits and Control Functions
• Equipotential Bonding
• Protection of Equipment

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Labeling Machine is issued.

The applicable standard for getting CE Certificate for Control Panel for Liquid Filling Machine is BS EN 60204-1:2006+A1:2009.

BS EN 60204-1:2006 gives guidance on safety and recommendations on electrical equipment for machinery. It gives specific instructions for safe maintenance of the point where electrical and electronic equipment comes in contact with the machine. 

These instructions are only for the machinery that operates with nominal supply voltages that is below 1,000V for alternating current or 1,500V for direct current, or with nominal supply frequencies below 200Hz.

For getting the CE Certificate for Control Panel for Liquid Filling Machine, certain requirements needs to be fulfilled. These are:

• High Voltage Test
• Insulation Resistance Test
• Earth Contact Resistance Test
• Protection Against Electric Shock
• Protection of Equipment

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Liquid Filling Machine is issued.

The applicable standard for getting CE Certificate for Control Panel for Monoblock Pick and Place Machine is BS EN 60204-1:2006+A1:2009. 

This standard applies to the application of electronic, electrical and programmable electronic equipment and systems to machines, which are not portable by hand while in function, including a group of machines functioning together in a coordinated manner. 

The equipment covered by BS EN 60204-1:2006+A1:2009 commences at the point of connection of the supply to the electrical equipment of the machine. 

For getting CE Certificate for Control Panel for Monoblock Pick and Place Machine, certain requirements that are mentioned in the standard need to be fulfilled. Some of these requirements are: 

• Verification that the electrical equipment complies with its technical documentation
• In case of protection against indirect contact by automatic disconnection, conditions for protection by automatic disconnection shall be verified
• Insulation resistance test
• Voltage test
• Protection against residual voltage
• Functional tests

Plus more specific tests as mentioned in the standard. 

After successful testing and compilation of test report, CE Certificate for Control Panel for Monoblock Pick and Place Machine is issued.

The applicable standard for getting CE Certificate for Control Panel for Decanter Centrifuge Machine is BS EN 60204-1:2009.

For getting CE Certification for Control Panel for Decanter Centrifuge Machine, certain requirements need to be fulfilled as mentioned in the standard. These are:

• High voltage test
• Insulation resistance test
• Earth contact resistance test
• Technical documentation
• Electric motors and associated equipment

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Decanter Centrifuge Machine is issued.

In Drum Blender Machine, container rotating around an inclined axis serves as a mixing tool. The rotating movement and the inclined arrangement of the container walls gives a mixing effect. Mixing, Homogenizing and dyeing of powdery or granulated components in the plastics processing, chemical, chemico-technological, food and luxury food industries, in pharmaceutical as well as in textile and leather factories.

Capacity Gross: 200 Lts.

Speed of Mixer: 20 R.P.M. Approx.

Electrical Service: 3 HP/1440 rpm/415V/3PH/ A.C. Supply.

Foundation: Not required.

We can do testing and CE marking for range of similar machineries like, mass mixer, drum blender, octagonal blender, and double cone blender, tablet coating machine and many more pharma instruments.

Applicable Directives

Low Voltage Directive – 2014/35/EU

Machinery Directive – 2006/42/EC

Low Voltage Directive

The LVD covers health and safety risks on electrical equipment operating with an input or output voltage of between 50 and 1000 V AC and 75 and 1500 VDC for direct current.

Machinery Directive

A machine is defined as an assembly of linked parts or components, at least one of which moves. Clearly this definition encompasses a very large range of machines, from simple power tools to complete automated industrial production lines.

Applicable Harmonized Standards

• EN 60204-1:2006+A1:2009,
• EN ISO 12100:2010

Testing is done by ITC INDIA Pvt. Ltd. as per harmonized Standard. An NABL Accredited Lab.