You can get CE Certificate for Electro Dynamic Vibration Shaker against the standard BS EN 60204-1 2006+A1 2009. For getting CE Certification for Electro Dynamic Vibration Shaker, some requirements have to be fulfilled.

These requirements are:

• High Voltage Test
• Insulation Resistance Test
• Earth Contact Resistance Test

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Electro Dynamic Vibration Shaker is issued.

You can get CE Certificate for Solar Street Light against the standard IEC 60598-1:2014 and 60598-2-3:2002. For getting CE Certification for Solar Street Light, some requirements have to be fulfilled as per the standard.

These requirements are:

• Marking
• Terminals and supply connection
• Provision for earthing
• External and internal wiring

Plus more specific tests as mentioned int the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Solar Street Light is issued.

You can get CE Certificate for Control Panel Enclosures and Junction Box Enclosures against the standard IEC 62208:2011. For getting CE Certification for Control Panel Enclosures and Junction Box Enclosures, some requirements have to be fulfilled. 

These requirements are:

• Service conditions
• Design and construction
• Marking
• Static loads

Plus more specific tests as mentioned in the standard.

After conducting all the tests, a test report is compiled and thereafter CE Certificate for Control Panel Enclosures and Junction Box Enclosures is issued.

You can get CE Certificate for Automatic Pump Controller against the standards IEC 60730-2-6:2015 & IEC 60730-1:2015. For getting CE Certificate for Automatic Pump Controller, some requirements need to be fulfilled.

These requirements are: 

• Pressure sensing
• Protection against electric shock
• Constructional requirements
• Provision for protective earthing

Plus more specific tests as mentioned in the standard.

After conducting these tests, a test report is compiled and thereafter CE Certificate for Automatic Pump Controller is issued.

You can get CE Certificate for Float Switch against the standards IEC 60730-2-15:2008 & IEC 60730-1:2015. For getting CE Certificate for Float Switch, some requirements need to be fulfilled.

These requirements are:

• Protection against electric shock
• Provision for protective earthing
• Terminals and terminations
• Moisture and dust resistance

Plus more specific tests as mentioned in the standard.

After theses tests are conducted, a test report is compiled and thereafter CE Certificate for Float Switch is issued.

You can get CE Certification for Sharp Blasters against the standard BS EN 61010-1:2010. 

BS EN 61010-1:2010 provides safety requirements for electrical equipment for measurement, control and laboratory use. The electrical equipment in this are:

• Electrical test and measurement equipment
• Electrical – industrial process control equipment
• Electrical laboratory equipment

BS EN 61010-1:2010 applies to only computers, processors etc. which form a part of the equipment that is in the scope of the standard or designed for use with the equipment.

For getting CE Certification for Sharp Blasters, certain requirements need to be fulfilled, which are:

• Protection against spread of fire
• Protection against electric shock
• Marking and documentation
• Protection against hazards from fluids

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Sharp Blasters is issued.

 You can get CE Certification for Three Faced Induction Motors against the standard IEC 60034-2-1:2007. For getting CE Certification for Three Faced Induction Motors, some requirements have to be fulfilled as per the standard.

These requirements are:

• Power Supply
• Test resistance
• Determination of efficiency
• Frequency

Plus more specific requirements as mentioned in the standard.

After these tests are conducted, the test report is complied and thereafter CE Certificate is issued for three faced induction motor.