How to Get CE Certificate for Vibration Monitoring System?

The applicable standard for getting CE Certificate for Vibration Monitoring System is BS EN 61010-1:2010.

Major requirements of this standard are:

• Marking and Documentation
• Protection Against Electric Shock
• Protection Against Mechanical Hazard
• Resistance to Mechanical Stresses
• Protection Against Hazard of Fire

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Vibration Monitoring System is issued.

About GCB

GCB is an abbreviation for Generator Circuit Breaker. This panel is used to control the generator in 13 X 1.56 MW Gas Genset Based Power Plant. Generator circuit breaker panel will work either standby applications or parallel applications. In a standby application, the generator will never be connected to the grid. It is used to connect the generator supply to applicable load by synchronizing incoming supply and generator output in terms of phase, frequency and voltage.

Input Power Supply: 400V AC, 3 Phase, 50 Hz Control Voltage: 110V DC

Applicable Directive

LOW VOLTAGE DIRECTIVE – 2014/35/EU

Why Low Voltage Directive is Applied?

The LVD covers health and safety risks on electrical equipment operating with an input or output voltage of between:

• 50 and 1000 V for alternating current
• 75 and 1500 V for direct current

It applies to a wide range of electrical equipment for both consumer and professional usage, such as household appliances, cables, power supply units, laser equipment, certain components like fuses etc.

EU legislation in the electrical sector is important to ensure that health and safety requirements are the same across Europe for products placed on the market.

Applicable Harmonized Standards

EN 60204-1:2006+A1:2009: Safety of machinery-Electrical equipment of machines – Part 1: General requirements.

Testing is done by ITC INDIA Pvt. Ltd. as per harmonized standards.

You can get CE Certificate for Automatic Spring Coiling Machine against the standard BS EN 60204-1. 

BS EN 60204-1 covers the safety of all the electrical and electronic and electronic equipment and systems applied to the machines. This standard promotes:

• Safety of persons and property
• Consistency of control response
• Ease of maintenance 

Where there is no dedicated product standard for machine, the verification shall always include:

• That the electrical equipment complies with respective technical documentation
• In the case of protection against indirect contact by automatic disconnection, protection by automatic disconnection shall be verified according to clause 18.2
• Functional tests clause 18.6 

And may include 

• Insulation resistance test
• Voltage test
• Protection against residual voltage

Plus more specified tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Automatic Spring Coiling Machine is issued.

The applicable standard for getting CE Certificate for Single Rotary Tablet Press is BS EN 60204-1:2009. 

For getting CE Certificate for Single Rotary Tablet Press, certain requirements are to be fulfilled as mentioned in the standard. These are:

• High Voltage Test
• Insulation Resistance Test
• Earth Contact Resistance Test
• Accessories and Lighting

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Single Rotary Tablet Press is issued.

The applicable standard for getting CE Certificate for Humidity Oven is BS EN 61010-1:2010. 

For getting CE Certification for Humidity Oven, certain requirements need to be fulfilled as mentioned in the standard. These are:

• Protection against hazards from fluids
• Protection against spread of fire
• Protection against electric shock
• A.C voltage test

Plus more specific tests as mentioned in the standard. 

After successful testing and compilation of test report, CE Certificate for Humidity Oven is issued.

The applicable standard for getting CE Certificate for Hot Air Oven is BS EN 61010-1:2010. 

For getting CE Certification for Hot Air Oven, certain requirements need to be fulfilled as mentioned in the standard. These are:

• Protection against hazards from fluids
• Protection against spread of fire
• Protection against electric shock
• A.C voltage test

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Hot Air Oven is issued.

The applicable standard for getting CE Certificate for Control Panel for Airjet Cleaning Machine is BS EN 60204-1:2006+A1:2009. 

For getting CE Certification for Control Panel for Airjet Cleaning Machine, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Protection Against Electric Shock
• Protection of Equipment
• High Voltage Test
• Earth Contact Resistance Test

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Airjet Cleaning Machine is issued.

The applicable standard for getting CE Certificate for Mini Roll Compactor is BS EN 60204-1:2006+A1:2009. 

For getting CE Certification for Control Panel for Mini Roll Compactor, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Protection against electric shock
• Earth Resistance Test
• High Voltage Test
• Insulation Resistance Test
• Accessories and Lighting

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Mini Roll Compactor is issued.

The applicable standard for getting CE Certificate for Mini Roll Compactor is BS EN 60204-1:2006+A1:2009. 

BS EN 60204-1:2006+A1:2009 specifies recommendations and requirements relating to electrical equipment of machines in order to promote:

• Safety of persons and property
• Consistency in control response
• Ease of maintenance

For getting CE Certification for Powder Filling Machine, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Protection by enclosures
• Protection against indirect contact
• Insulation Resistance Test
• Voltage Test
• Conductors and Cables

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Powder Filling Machine is issued.

The applicable standard for getting CE Certificate for Control Panel for Tablet Press is BS EN 60204-1:2006+A1:2009. 

For getting CE Certification for Control Panel for Control Panel for Tablet Press, certain requirements need to be fulfilled as mentioned in the standard. These are: 

• Insulation Resistance Test
• Technical Documentation
• Marking, warning, signs and reference designations
• High Voltage Test

Plus more specific tests as mentioned in the standard.

After successful testing and compilation of test report, CE Certificate for Control Panel for Tablet Press is issued.