About

With the help of a rotor, spoke and multiple terminals, rotary switches are available to connect two or more electrical circuits. They deliver greater make – break throw capabilities, making them ideal for main on/off switch of electrical panels of different types of machineries and other telecommunication equipment.

Some of the types of rotary switches based on number of connections (polarity) are:

• Miniature rotary switch.
• 2 pole rotary coded switch.
• 4 pole rotary coded switch.
• 4 position rotary switch.
• Single Pole Rotary Switches.
• Double Pole Rotary Switches.

Other Ways to Differentiate Rotary Switch:

• ROTARY CAM SWITCH ( 6 – 20A, 25-32A, 40A, 63A : 440 VAC)
• ROTARY KNIFE SWITCH (10A : 220 VAC )
• ROTARY TYPE AUXILLIARY SWITCH (7.5A : 264VDC)

Applicable Directive

LOW VOLTAGE DIRECTIVE – 2014/35/EU

Why Low Voltage Directive Applied?

The LVD covers health and safety risks on electrical equipment operating with an input or output voltage of between 50V and 1000 V for A.C. and 75V and 1500 V for D.C.
It applies to a wide range of electrical equipment for both consumer and professional usage, such as:

• Household appliances
• Cables
• Power supply units
• Laser equipment

To place product in European Market, product must ensure health and safety requirements as per EU legislation process.

Applicable Harmonized Standard

EN 60947-3:2009+A1:2012: Low-Voltage Switchgear and Control Gear – Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination units.

About

The non-priming pumps remain empty if they don’t have any liquid. When they are turned ON, the impeller will spin without moving any liquid.

Range and Technical Specification

• Head: up to 38 Meters
• Power Rating: 0.37 KW / 0.5 HP
• Pipe size: Suction(1”BSP) X Delivery (1”BSP)
• Phase: 1 Phase
• Rated Voltage: 220 V
• Frequency: 50 Hz
• Speed: 2800 rpm

Features

• Works with wide input voltage (180-240).
• Class ‘B’ insulation.
• Replaceable wearing parts.
• High pressure dies cast rotor made from high conductive aluminum.
• Type of protection IP44.
• Designed to prevent overloading and motor burning.
• Fitted with thermal over load protector (TOP).

Application

• Water Supply for domestic use in Bungalows, Apartment, Hotels.

Applicable Directives

1. Low Voltage Directive –  2014/35/EU
2. Machinery Directive  –  2006/42/EC

Low Voltage Directive: The LVD covers health and safety risks on electrical equipment operating with an input or output voltage of between 50 and 1000 V AC  and  75  and  1500 VDC for direct current.

Machinery Directive: A machine is defined  as an assembly of linked parts or components, at least  one of which moves. Clearly this definition encompasses a very large range of machines, from simple power tools to complete automated industrial production lines.

Applicable Harmonized Standards 

• EN 60335-1: 2012+A11:2014; 
• EN 60335-2-41: 2003+A2:2010;
• EN 809: 1998+A1:2009

Testing is done by ITC INDIA Pvt. Ltd. as per harmonized Standard.

You can get CE Certification for AC-DC SMPS Based Charger against the standard IEC 60950-1:2005+A1:2009+A2:2013. For getting CE Certification for AC-DC SMPS Based Charger, you have to simply fulfill the following requirements mentioned in the standard. 

These requirements are: 

• Protection from hazards
• Protection against mechanical damage
• Insulating materials in electrical connections
• Termination of conductors
• Fulfillment of all physical requirements

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled, and thereafter CE Certificate for AC-DC SMPS Based Charger is issued.

You can get CE Certification for LED High Bay Light against the standard BS EN 60598-1:2015. For getting CE Certification for LED High Bay Light, some requirements have to be fulfilled as per mentioned in the standard.

These requirements are: 

• Marking Requirements
• Mechanical Strength
• Internal Wiring
• Protection against electric shocks
• High Voltage Test

Plus more specific tests as mentioned in the standard.

After conducting these tests, a test report is compiled and thereafter CE Certificate for LED High Bay Light is issued. 

You can get CE Certificate for Electro Dynamic Vibration Shaker against the standard BS EN 60204-1 2006+A1 2009. For getting CE Certification for Electro Dynamic Vibration Shaker, some requirements have to be fulfilled.

These requirements are:

• High Voltage Test
• Insulation Resistance Test
• Earth Contact Resistance Test

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Electro Dynamic Vibration Shaker is issued.

You can get CE Certificate for Solar Street Light against the standard IEC 60598-1:2014 and 60598-2-3:2002. For getting CE Certification for Solar Street Light, some requirements have to be fulfilled as per the standard.

These requirements are:

• Marking
• Terminals and supply connection
• Provision for earthing
• External and internal wiring

Plus more specific tests as mentioned int the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Solar Street Light is issued.

You can get CE Certificate for Control Panel Enclosures and Junction Box Enclosures against the standard IEC 62208:2011. For getting CE Certification for Control Panel Enclosures and Junction Box Enclosures, some requirements have to be fulfilled. 

These requirements are:

• Service conditions
• Design and construction
• Marking
• Static loads

Plus more specific tests as mentioned in the standard.

After conducting all the tests, a test report is compiled and thereafter CE Certificate for Control Panel Enclosures and Junction Box Enclosures is issued.

You can get CE Certificate for Automatic Pump Controller against the standards IEC 60730-2-6:2015 & IEC 60730-1:2015. For getting CE Certificate for Automatic Pump Controller, some requirements need to be fulfilled.

These requirements are: 

• Pressure sensing
• Protection against electric shock
• Constructional requirements
• Provision for protective earthing

Plus more specific tests as mentioned in the standard.

After conducting these tests, a test report is compiled and thereafter CE Certificate for Automatic Pump Controller is issued.

You can get CE Certificate for Float Switch against the standards IEC 60730-2-15:2008 & IEC 60730-1:2015. For getting CE Certificate for Float Switch, some requirements need to be fulfilled.

These requirements are:

• Protection against electric shock
• Provision for protective earthing
• Terminals and terminations
• Moisture and dust resistance

Plus more specific tests as mentioned in the standard.

After theses tests are conducted, a test report is compiled and thereafter CE Certificate for Float Switch is issued.

You can get CE Certification for Sharp Blasters against the standard BS EN 61010-1:2010. 

BS EN 61010-1:2010 provides safety requirements for electrical equipment for measurement, control and laboratory use. The electrical equipment in this are:

• Electrical test and measurement equipment
• Electrical – industrial process control equipment
• Electrical laboratory equipment

BS EN 61010-1:2010 applies to only computers, processors etc. which form a part of the equipment that is in the scope of the standard or designed for use with the equipment.

For getting CE Certification for Sharp Blasters, certain requirements need to be fulfilled, which are:

• Protection against spread of fire
• Protection against electric shock
• Marking and documentation
• Protection against hazards from fluids

Plus more specific tests as mentioned in the standard.

After these tests are conducted, a test report is compiled and thereafter CE Certificate for Sharp Blasters is issued.